How Metro Ethernet Over Copper Saves Construction Costs
MetroE using twisted pair copper already in the ground delivers higher bandwidth without fiber optic construction costs.
By: John Shepler
You’ve heard that Metro Ethernet service offers exceptionally good pricing and higher bandwidths than you can get from your copper-based T1 lines. But those huge savings can vaporize once you get the estimates for fiber optic construction. Is there any way you can participate in the cost advantages of Ethernet service without having to come up with a large amount of capital funding?
Metro Ethernet Meets Twisted Pair Copper Wiring
You bet there is. It’s a technology that combines the advantages of Ethernet connection services with the availability of twisted pair copper cabling. The service you want to ask for is “Metro Ethernet over Copper”.
Just what is Metro Ethernet over Copper and how does it differ from what’s generically called Metro Ethernet?
Actually, the similarities are many and the differences are few. Metro Ethernet over Copper, also called Ethernet over Copper or EoC, is more about the delivery mechanism or physical network than the service itself. Ethernet for the Wide Area Network (WAN) is Ethernet regardless of how it is provisioned. Metro Ethernet refers to Ethernet services that connect your business location to a carrier’s point of presence or an extension of your Local Area Network (LAN) to other locations within a city or suburban area. The copper reference means that multiple twisted pair copper is used to connect your building instead of brining in a fiber optic cable.
What Copper Is Used To Deliver This Service?
Where does this copper come from and why is it cheaper than fiber? The copper is already there. It’s the same multiple pair binder cable that the telephone company installed when the building was constructed. These cables generally have many small gauge copper wires twisted together in pairs. Each pair can carry one analog telephone conversation or be used to transport a digital signal. Metro Ethernet service providers install a special piece of termination equipment at your site to connect the copper pairs they’ll be using. The more pairs they an employ, the higher the bandwidth they can provide.
Range of Bandwidths Available
How much Ethernet bandwidth can you expect with copper-based service? It depends a lot on how close you are to an on-network fiber lit building or a carrier office. The digital signal degrades with distance. Generally, you can get anywhere from 10 Mbps to 50 Mbps Ethernet service over copper. That’s a lot more than T1 lines at 1.5 Mbps and as much bandwidth as most small and medium size businesses need.
Are you interested in finding out if you can get high bandwidth, low cost Ethernet service? If so, check Metro Ethernet over Copper prices and availability for your location now. You may be surprised by how much you can get for your telecom dollar.
Ethernet Buildings Instant Locator
Find out in seconds if your building
or a nearby location is already lit for low cost carrier business (not residential) Ethernet
services. Simply enter your commercial building address in the form below
and check the map results...
Our extensive telecom and network services are provided by Telarus, Inc., a premier bandwidth broker and master agency. Please provide accurate phone & email contact information or call toll free for support anytime at 1-888-848-8749. All information you provide will be used only to support your inquiry and will not be shared. Note: These services are appropriate for business addresses only.